In the past several years cloud-based technologies has become very popular. We can observe lots of services starting from cloud infrastructure to whole cloud-based platforms for testing and development. Most of cloud-based services are very convenient and reliable. We often see media reports about big companies transferring their infrastructure to cloud based services. Unfortunately, cloud-based services have some certain disadvantages like:
- Inability of self-management and lack of full server and service control.
- Communication problem between customer and service support team.
- Subscription-based service.
- High cost of cloud-based technologies.
The most important point is the last one. The cost of cloud-based services has increased in geometric progression. New models of monetization are invented. And the companies that invested in cloud development start to get back their money.
The problem is particularly pointed when you need to process big data, for example, to collect and analyze log files for the whole appl stack in company, such as:
- Server logs.
- Mobile apps logs and Mobile Craches.
In this article we will tell you how to install and setup the standalone solution for log collection and analysis and to save resources.
LogPacker can collect and analyze any types of log files on any platforms. There is a straight integration with most of them, it means that the service automatically recognizes any types of log files, collects, aggregates and analyzes them.
Let’s consider the main steps of the process for log collection and analysis:
- Infrastructure setup.
- Cluster setup for log file collection and analysis.
- Agents setup on servers.
- LogPacker API setup.
- Notification setup.
We will go over every point in detail, starting with architecture setup for log storing and analysis.
LogPacker cluster- is a set of servers (where LogPacker is installed), combined in one network. In can consist of several linked LogPacker-servers or it can be a standalone application, installed on Linux-server. Several nodes in cluster allow to load-balance and save logs concurrently to several types of storages.
We provide a free license with a limit of five servers; it means that you can build a cluster of five nodes, which can handle any load for free.
First let’s see how to set up a cluster of two servers. After registration you will be able to use the console daemon-application. It is necessary to install it on two servers. You can do it with the help of rpm/deb pack or to install it manually from the tar-archive.
Let’s consider the install process for every way in detail:
sudo rpm -ihv logpacker-1.0_27_10_2015_03_45_30-1.x86_64.rpm
Daemon will be installed to /opt/logpacker folder.
sudo dpkg -i logpacker_1.0-27-10-2015_03-45-30_amd64.deb
Setting from .tar archive allows to install LogPacker – daemon to any directory and to have several daemons on one machine (if necessary).
tar -xvf logpacker-27-10-2015_03-45-30.tar.gz logpacker-27-10-2015_03-45-30/ logpacker-27-10-2015_03-45-30/configs/ logpacker-27-10-2015_03-45-30/configs/services.json logpacker-27-10-2015_03-45-30/configs/notify.json logpacker-27-10-2015_03-45-30/configs/main.json logpacker-27-10-2015_03-45-30/logpacker_api logpacker-27-10-2015_03-45-30/logpacker_daemon
Before service running, it is necessary to setup log storage. LogPacker server supports the following types of storages: file, elasticsearch, mysql, postgresql, mongodb, hbase, influxdb, kafka, tarantool, memcached. We will setup the servers for concurrent write to two services: Memcached и PostgreSQL. Memcached can be used as “hot cache" for storing fresh logs.
PostgreSQL setting in Ubuntu, user and database creation:
sudo apt-get install postgresql postgresql-contrib sudo -u postgres psql CREATE DATABASE logpacker; CREATE USER logpacker WITH password '12345'; GRANT ALL privileges ON DATABASE logpacker TO logpacker;
You can install PostgreSQL and Memcached on any server. Here we can see the setting on the first server.
Memcached setting in Ubuntu:
sudo apt-get install memcached
Memcached will be available on 11211 port.
We will also need Supervisord for daemoning LogPacker application. Let’s create /etc/supervisor/conf.d/logpacker_daemon.conf file with the following content:
[program:logpacker_daemon] command=/opt/logpacker/logpacker_daemon --server autostart=true autorestart=true startretries=10 stdout_logfile=/tmp/logpacker-out.log stdout_logfile_maxbytes=250MB stdout_logfile_backups=10 stderr_logfile=/tmp/logpacker-err.log stderr_logfile_maxbytes=250MB stderr_logfile_backups=10
Report Supervisord of a new service:
sudo supervisorctl reread
At the end we got the following architecture:
Infrastructure is ready and we can turn to LogPacker setting.
Cluster setup for server log collection
First we need to combine two servers to the cluster. Each server has a configuration file configs/server.ini that we need to set up.
For full configuration we need to indicate other cluster nodes to only one server. This is an example of the first server configuration:
host=server1 port=9999 cluster.nodes=server2:9999
Let’s indicate services for log storage on two servers:
providers=memcached,postgresql [PostgresqlStorage] host=server1 port=5432 user=logpacker pass=12345 dbname=logpacker table=logpacker_event_collector [MemcachedStorage] address=server1:11211 prefix=logpacker
Let’s run two nodes with the help of Supervisorctl:
sudo supervisorctl start logpacker_daemon
Cluster of two servers is ready to go. You can use it not only for log storing and aggregation; at the same time the service can collect logs from the servers and save them in PostgreSQL and Memcached. For that purpose you need to add flag-agent to Supervisord.
command=/opt/logpacker/logpacker_daemon --agent --server
Now let’s turn to agent setting on servers. File logpacker_daemon contains three options of running: only Agent, only Server and parallel start. This is an example of agent start in Supervisord:
[program:logpacker_daemon] command=/opt/logpacker/logpacker_daemon --agent autostart=true autorestart=true startretries=10 stdout_logfile=/tmp/logpacker-out.log stdout_logfile_maxbytes=250MB stdout_logfile_backups=10 stderr_logfile=/tmp/logpacker-err.log stderr_logfile_maxbytes=250MB stderr_logfile_backups=10
It is possible to set as much agents as your license allows. It is enough to have one Agent on every server that is connected with LogPacker cluster. Every Agent has its own configuration file ( configs/agent.ini), where you need to write cluster address (in our case server1:9999).
Agent fault tolerance is achieved by Cluster Healthcheck and data save in internal temporary memory in case of cluster failure.
Agent can collect logs of all possible services out of the box. It is possible to add/remove services in configs/agent.ini :
Every service has its own settings, indicating log-files location of configuration files in configs/services.ini. Let’s setup the Agent for collecting logs of your application that are stored in random directory.
Let’s add a new service with paths to logs in configs/services.ini (with Wildcard support)
Let’s inform the Agent of our intention for collecting logs of this service (configs/agent.ini):
LogPacker API setup
You can setup log displaying and integrate it to any project, receiving fresh processed data, saved by LogPacker Cluster.
LogPacker API is provided with the main daemon. This is a binary file logpacker_api, using the configuration from configs folder.
For running we will also need a new command in Supervisord from a new file /etc/supervisor/conf.d/logpacker_api.conf:
[program:logpacker_api] command=/opt/logpacker/logpacker_api autostart=true autorestart=true startretries=10 stdout_logfile=/tmp/logpacker-api-out.log stdout_logfile_maxbytes=250MB stdout_logfile_backups=10 stderr_logfile=/tmp/logpacker-api-err.log stderr_logfile_maxbytes=250MB stderr_logfile_backups=10
Let’s update Supervisord configuration and run API server:
sudo supervisorctl reread sudo supervisorctl start logpacker_api
As a data source it is necessary to indicate service that LogPacker Cluster uses for log saving. API can read data only from one storage, but there is also a possibility to indicate “backup" resources in case our main service fails.
Let’s read data from Memcached, having PostgreSQL in store configs/api.ini:
provider=memcached failover.providers=postgresql host=127.0.0.1 port=9998
By default, REST API will be available at http://127.0.0.1:9998.
API documentation and its methods are available at - https://logpacker.com/resources#rest-api.
LogPacker Cluster sends all received and processed fatal errors to the email of your account once an hour, by default. It is only possible if there is an installed local sendmail on your server.
The service also supports the following types of notifications:
- Sendmail (by default)
- Twilio SMS
Message intervals and levels could be set in configs/notify.ini file:
providers=sendmail interval=3600 levels=Fatal,Error tags=*
Eventually, in a short time we have setup the system for log collection and analysis that meets all the requirements. Also, with little effort we can add to this system services for analyzing JS errors and log files from Mobile apps. System setting and support is quite easy.
The system can be easily scaled by adding new nodes to the cluster. Resources consumption can be minimized both on agent servers and on LogPacker Cluster itself.
Processing big data requires lots of resources. Data loss can become a huge problem for a company. LogPacker saves resources on every system level and provides fault tolerant and reliable solution for log collection and analysis.
Install and setup your own LogPacker Cluster absolutely free!